65 20 090 Removing and installing or replacing antenna amplifier (Cooper 4-door hatchback and Cooper 2-door hatchback, 2020-2023)

Preliminary work needed: 

• Remove TAILGATE TRIM AT BOTTOM .

REMOVAL: 

Unlock plug connections (1) and disconnect.

Remove screw (2).

Remove antenna amplifier (3).

Courtesy of BMW OF NORTH AMERICA, INC.

INSTALLATION: 

Position antenna amplifier (3).

Tighten screw (2).

Join and lock plug connections (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking: 

• Install TAILGATE TRIM PANEL, BOTTOM .