Removing the rear fog light
NOTE:
RISK OF DAMAGE
Mechanical effects.
Paint damage.
Mechanical effects.
Paint damage.
- Mask those working areas at risk with yellow plastic adhesive tape.
- Remove and install heavy or bulky components with the aid of another person/other persons.
NOTE:
TECHNICAL INFORMATION
Notes for the gap dimensions of the body form the basis of this REP and it is mandatory to observe them.
For additional information see: BODY DIMENSIONS
Notes for the gap dimensions of the body form the basis of this REP and it is mandatory to observe them.
For additional information see: BODY DIMENSIONS
Preliminary work
- Refer to REMOVING THE LEFT AND RIGHT TAIL LIGHTS .
- Refer to REMOVING REAR BUMPER PANEL .
- Loosen screws (1) .
- Remove rear fog light (2) .