Installing the oil pressure switch
- Guide in and install oil pressure switch (2).
- Tighten oil pressure switch (2).
TIGHTENING TORQUE SPECIFICATIONS
| Oil pressure switch to crankcase | ||
|---|---|---|
| Sensor | tightening torque | 15 Nm |
- Connect connectors (1) and lock.
The connector (1) must engage audibly.
Follow-up work
- Refer to INSTALLING FAN COWL WITH ELECTRIC FAN .
- Refer to INSTALLING CROSS CONNECTION .
- Refer to INSTALLING INTAKE SILENCER HOUSING .
- Refer to INSTALLING INTAKE PORT .
- Refer to CHECKING ENGINE OIL LEVEL .