Crimping tool for repairing the coaxial line RTK031

02 02 10 (622)

All

Situation: With a fault (e.g. cable break) on the antenna wire, the complete line from the audio system in the dashboard to the vehicle antenna (rear end) must currently be replaced.

The use of the new crimping tool and new vehicle-specific spare parts enables partial repairs on the coaxial lines. The repair efforts and use of materials are therefore significantly reduced.

NOTE: This crimping tool is suitable for all vehicles with coaxial lines RTK031.

The scope of delivery and application are described in the attached enclosures:

Enclosure 1 Scope of delivery
Enclosure 2 Mounting the tool head
Enclosure 3 Cutting and strip off insulation, shielding
Enclosure 4 Crimping connector

Procedure: Special offer tools will be sent to every dealer that has a tools agreement.

Order through BMW part ordering channel .