51 34 211 Remove and install/replace rubber window seal for rear left or right door window glass (Cooper 4-door hatchback models, 2020-2023)

Preliminary work needed: 

• Remove OUTER WINDOW CHANNEL STRIP AT REAR DOOR .

Removal: 

Partly release rubber window seal for door window glass (1).

Release screws (2) and carefully feed out the triangular trim (3) upwards and remove it.

Courtesy of BMW OF NORTH AMERICA, INC.

Remove rubber window seal (1) sideways from door window frame.

Pull out rubber window seal (1) from window guide rail and remove.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Insert rubber window seal (1) into the guide rail.

Mount rubber window seal (1) on door window frame.

Courtesy of BMW OF NORTH AMERICA, INC.

Feed in triangular trim (3) and tighten screws (2).

Carefully mount rubber window seal (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking: 

• Install OUTER WINDOW CHANNEL STRIP AT REAR DOOR .