51 31 021 Removing and installing/replacing windshield rubber frame (top) (Cooper 2-door hatchback models, 2020-2023)

Removal:

IMPORTANT: The rubber frame (1) has an aluminum frame insert (2).
Release double-sided adhesive tape of roof rubber frame (1).
Carefully unwind rubber frame (1) (windshield breakage).
Do not use mounting lever (windshield breakage).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Tear-off lip (3) may be stuck to adhesive (4).
During removal of rubber frame (1), tear-off lip (3) may tear off and remain in vehicle.
5 Windshield
6 Gripping lip

Installation:

Remove WINDSHIELD .

Fit rubber frame (1) with tear-off lip (3).

Do not cut gripping lip (4).

If necessary, remove adhesive residue from windshield.

Slide new rubber frame (1) onto upper edge of windshield and ensure correct alignment (note center marking).

To facilitate installation, coat rubber frame (1) and body aperture with water.

2 Aluminum frame insert

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

Install WINDSHIELD .