51 13 123 Removing and installing/replacing the windshield panel cover, left V.4 (Cooper 4-door hatchback and Cooper 2-door hatchback, 2020-2023)

Removal: 

Detach seal (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Loosen cap nuts (1).

Open locks (2) by turning them anti-clockwise.

Remove windshield panel cover (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Thread in the windshield panel cover (3).

Turn the locks (2) to the right until the stop is reached.

Tighten cap nuts (1).

Tightening torque 61 21 6AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Mount seal (1).

Courtesy of BMW OF NORTH AMERICA, INC.