51 11 060 Removing and installing/replacing support for front lower bumper cover (Cooper 4-door hatchback and Cooper 2-door hatchback, 2020-2023)

Preliminary work needed: 

• Remove front BUMPER COVER .

REMOVAL: 

Unscrew the screws (1).

Detach holder of air duct (2) upwards out of support (3).

Remove carrier (3).

Courtesy of BMW OF NORTH AMERICA, INC.

INSTALLATION: 

Insert support (3).

Attach holder of air duct (2) in support (3).

Tighten down screws (1).

Tightening torque 51 11 3AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install BUMPER COVER , front