51 32 211 Removing and installing/replacing rubber window seal for front left or right side window (Cooper 4-door hatchback models, 2020-2023)

Preliminary work needed: 

• Remove WINDOW CHANNEL STRIP ON OUTSIDE OF FRONT DOOR .

Removal: 

Carefully lever out and remove triangular trim (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Remove rubber window seal (1) sideways from door window frame.

Pull out rubber window seal (1) from window guide rail and remove.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Insert rubber window seal (1) into the window guide rail.

Mount rubber window seal (1) on door window frame.

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully mount triangular trim (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking: 

• Install WINDOW CHANNEL STRIP ON OUTSIDE OF FRONT DOOR .