Removing the model inscription
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
- To avoid paint damage: Mask off the component in the working area with plastic adhesive tape.
- Heat the model inscription (1) carefully with a hot air blower and release it from the adhesive strip with the special tool 0 490 539 (00 9 322) .
- Remove adhesive residue from the trunk lid.