51 13 106 Removing and installing/replacing trim (wheel arch) at rear door, left or right (Cooper 4-door hatchback models, 2020-2023)

Special tools required:

Do not scratch or damage visible surfaces.

Removal:

Lever out rubber covers (1) and release screw underneath.

Release wheel arch trim (2) from clips (3) by means of special tool 00 9 325 and remove.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

NOTE: The clips (3) must not be damaged or missing.

Position wheel arch trim (2) and engage in clips (3).

Tighten screw and secure rubber covers (1).

Courtesy of BMW OF NORTH AMERICA, INC.