Installing the rear bumper cover
- Remove the bumper cover (1) with the help of a support person.
- Connect and lock the connectors for the rear fog lights and/or ultrasonic sensors.
- Release the bumper cover (1) from the detents in dashed line area.
- Tighten screws (1) left and right.
TIGHTENING TORQUES SPECIFICATION
| Bumper panel, rear | ||
|---|---|---|
| Screw | tightening torque | 2.5 Nm |
- Tighten all bolts (arrows).
TIGHTENING TORQUES SPECIFICATION
| Bumper panel, rear | ||
|---|---|---|
| Screw | tightening torque | 2.5 Nm |
Follow-up work
- Refer to INSTALLING THE LEFT AND RIGHT TAIL LIGHTS .
- Refer to INSTALLING THE DIFFUSER .