61 33 060 Removing and installing/replacing both fanfare horns (Cooper 4-door hatchback and 2-door hatchback 2020-2023, except JCW models)

Preliminary work needed: 

• Remove FRONT BUMPER COVER .

Removal: 

Unlock and disconnect connector (1) on cable clip.

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and feed out holder with fanfare horns (2) downwards.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Feed in holder with fanfare horns (2) from below and tighten with screws (1).

Tightening torque 61 33 1AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Connect connector (1) to cable clip.

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install FRONT BUMPER COVER .