Install the remote control receiver
- Connect connector (1).
- Position the remote control receiver (3) and fasten the expanding rivet (2).
Follow-up work
- Refer to INSTALLING THE REAR SIDE TRIM PANEL .
- Refer to INSTALLING THE C-PILLAR TRIM PANEL .
- Refer to INSTALLING THE UPPER B-PILLAR TRIM PANEL .
- Refer to INSTALLING THE STRUT IN CARGO AREA .
- Refer to INSTALLING FRONT LUGGAGE COMPARTMENT FLOOR TRIM PANEL .
- Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .