Installing the front wheel arch cover
NOTE:
To provide a better overview: Schematic diagram with partially hidden components.
- Guide the front wheel arch cover (5) in.
- Tighten down screws (1) and (2).
TIGHTENING TORQUES SPECIFICATION
| Wheel arch cover | ||
|---|---|---|
| screw | Tightening torque | 2.6 Nm |
| Plastic nut | Tightening torque | 2.6 Nm |
- Tighten nut (3).
TIGHTENING TORQUES SPECIFICATION
| Wheel arch cover | ||
|---|---|---|
| screw | Tightening torque | 2.6 Nm |
| Plastic nut | Tightening torque | 2.6 Nm |
- Secure the clip (4).
Follow-up work
- Refer to MOUNTING THE FRONT WHEEL .
- Refer to INSTALLING THE FRONT WHEEL ARCH TRIM .