61 33 040 Removing and installing/replacing a fanfare horn (Cooper 4-door hatchback and 2-door hatchback 2020-2023, except JCW models)

Preliminary work needed: 

• Remove FRONT BUMPER COVER .

Removal: 

Fanfare horn on top holder: 

Unlock and disconnect the connector (1).

Release nut (2) and feed out fanfare horn (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Fanfare horn on bottom holder: 

Release nut (1) and feed out fanfare horn (2).

Unlock and disconnect associated connector.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Fanfare horn on top holder: 

Join fanfare horn (3) and tighten with nut (2).

Tightening torque 61 33 2AZ .

Connect the connector (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Fanfare horn on bottom holder: 

Connect associated connector.

Join fanfare horn (2) and tighten with nut (1).

Tightening torque 61 33 2AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install FRONT BUMPER COVER .