63 21 180 Removing and installing/replacing left or right tail light (Cooper 4-door hatchback and Cooper 2-door hatchback, 2020-2023)

Preliminary work needed: 

• Remove COVER ON TAIL LIGHT .

Removal: 

Loosen screws.

Remove tail light (1) towards rear.

Unlock and disconnect associated connector.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Connect connector and join tail light (1) in side panel.

Tighten the screws.

Tightening torque 63 21 1AZ .

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking: 

• Install COVER ON TAIL LIGHT .