62 30 530 Replace combination disc (Head-Up Display) (Cooper 4-door hatchback and Cooper 2-door hatchback, 2020-2023)

Special tools required:

64 1 020
00 9 030

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD PROTECTION) .

IMPORTANT: Risk of damage!
Do not scratch glass pane of head-up display.

Preliminary work needed:

Remove TRIM FOR HEAD-UP DISPLAY .
Connect diagnostic system

Removal:

Fold out service flap (1) in arrow direction.

NOTE: Undo the service flap (1) at the side using special tool 64 1 020 .

G11649967

Courtesy of BMW OF NORTH AMERICA, INC.

Open the lock (1) in arrow direction on both sides with special tool 00 9 030 .

G11649968

Courtesy of BMW OF NORTH AMERICA, INC.

Bring the combination disc (1) into the service position (B) using the diagnostic system.

G11649969

Courtesy of BMW OF NORTH AMERICA, INC.

Feed the combination disc (1) out of the Head-Up Display (2) in arrow direction.

G11649970

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Feed the combination disc (1) into the Head-Up Display (2) in arrow direction.

G11649971

Courtesy of BMW OF NORTH AMERICA, INC.

Break-in the combination disc (1) in the Head-Up Display using the diagnostic system.

G11649969

Courtesy of BMW OF NORTH AMERICA, INC.

Close the lock (1) in arrow direction on both sides with special tool 00 9 030 .

G11649973

Courtesy of BMW OF NORTH AMERICA, INC.

Close service cover (1) in arrow direction.

NOTE: Make sure the service flap (1) is properly engaged.

G11649974

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

Installing the TRIM FOR THE HEAD-UP DISPLAY .