Removing and installing/replacing complete rear fog light (John Cooper Works Convertible)

Removal:

Unscrew the screws (1).

Slightly pull bumper cover (2) towards rear.

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock detents (1).

Feed out rear fog light (2) towards rear.

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock and disconnect the connector (1).

Remove rear fog light (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

NOTE: Retaining tabs on the rear fog light (1) must not be missing or damaged.

Courtesy of BMW OF NORTH AMERICA, INC.

Connect the connector (1).

Feed in rear fog light (2).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Ensure rear fog light (2) is properly latched (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten bumper cover (2) with screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.