65 24 020 Removing and installing/replacing blocking circuit (Cooper 4-door hatchback and Cooper 2-door hatchback, 2020-2023)

Preliminary work needed: 

• Remove TAILGATE TRIM PANEL, BOTTOM .

REMOVAL: 

Unlock plug connections (1) and disconnect.

Remove screw (2).

Remove blocking circuit (3).

Courtesy of BMW OF NORTH AMERICA, INC.

INSTALLATION: 

Position band elimination circuit (3).

Tighten screw (2).

Join and lock plug connections (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required reworking: 

• Install TAILGATE TRIM PANEL, BOTTOM .