66 53 020 Removing and installing (replacing) reversing camera (Cooper 4-door hatchback and Cooper 2-door hatchback, 2020-2023)
IMPORTANT:
Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION)
!
Preliminary work needed:
- Removing the TRUNK LID HANDLE .
Removal:
Unscrew the screws (1).
Remove rear view camera (2) from trunk lid handle (3).
Installation:
Insert rear view camera (2) correctly into trunk lid handle (3).
Tighten down screws (1).
Required reworking:
- Install TRUNK LID HANDLE FOR TRUNK LID .
- Carry out reversing camera functional check
Replacement:
Perform the PROGRAMMING/CODING .