Replacing the Vehicle Sound Generator (VSG)

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

• Loosen screws (1).
• Remove the Vehicle Sound Generator (VSG) (2) from the holder (3).

Courtesy of BMW OF NORTH AMERICA, INC.

• Replace the Vehicle Sound Generator (VSG).

  Parts:  Vehicle Sound Generator (VSG)

• Install the Vehicle Sound Generator (VSG) (2) on the holder (3).
• Tighten the screws (1).

TIGHTENING TORQUES SPECIFICATION

Holder of VSG to the body/VSG to the holder
M6X20	tightening torque	6 Nm
M6X12	tightening torque	6 Nm
Hexagon nut	tightening torque	6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.