Remove the B-pillar trim panel upwards
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Release the B-pillar trim panel (1) at the clamps (2).
- Thread the B-pillar trim panel (1) out of the guides downward and to the inside and remove.
- If removing completely:
- Remove end lining.
- Thread out the belt strap and remove the B-pillar trim panel.