Removing the idler pulley
Preliminary work
- Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
- Refer to REMOVING THE ACOUSTIC COVER .
- Refer to REMOVING INTAKE PORT .
- Refer to REMOVING INTAKE SILENCER HOUSING .
- Refer to REMOVING CROSS CONNECTION .
- Refer to REMOVING TANK VENT VALVE .
- Refer to REMOVING THE SERVOMOTOR FOR THE ECCENTRIC SHAFT .
- Refer to REMOVING THE INTAKE PLENUM .
- Refer to REMOVING FRONT RIGHT WHEEL .
- Refer to REMOVING THE FRONT RIGHT WHEEL ARCH COVER .
- Refer to REMOVING THE WASHER FLUID RESERVOIR PARTIALLY .
- Refer to IF INSTALLED: REMOVING THE RIGHT BRAKE VENTILATION DUCT .
- Refer to REMOVING DRIVE BELT .
- Refer to REMOVING THE ALTERNATOR .
- Loosen screw (1) .
- Remove the idler pulley (2) .