Replace the belt tensioner
NOTE:
TECHNICAL INFORMATION
The belt tensioner must be installed to relieve the tension. The special tools or transportation retainers must be installed for disassembly.
The belt tensioner must be installed to relieve the tension. The special tools or transportation retainers must be installed for disassembly.
- Loosen screw (1).
- Guide out and remove idler pulley (2) on belt tensioner (3).
- Replace belt tensioner (3).
Parts: Belt tensioner
- Guide in and install idler pulley (2) on belt tensioner (3).
- Tighten down screw (1).
TIGHTENING TORQUES SPECIFICATION
| Idler pulley to belt tensioner | ||
|---|---|---|
| M8 | Tightening torque | 28Nm |