Section 88 (Engine - Tightening Torques - B36 & B38 Engines -- Cooper, F55 & F56): VANOS: VANOS
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2019 MINI Cooper, 2018 MINI Cooper, 2017 MINI Cooper, 2016 MINI Cooper, and 2015 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Intake and exhaust VANOS, central bolt to camshaft | B38 / B36 (up to production date 06/2015) |
M12 | ||
| 1. Join | 30 Nm | |||
| 2. Join | 50 Nm | |||
| 3. Angle of rotation | 65° | |||
| 1AZ Intake and exhaust VANOS, central bolt to camshaft |
B38 / B36 (from production date 07/2015 up to production date 01/2017) |
M22 | ||
| 1. Join | 30 Nm | |||
| 2. Join | 50 Nm | |||
| 3. Angle of rotation | 25° | |||
| 1AZ Intake and exhaust VANOS, central bolt to camshaft (use special tool 2 450 487) |
B38 / B36 (from production date 01/2017) |
M21 | ||
| 1. Join | 10 Nm | |||
| 2. Join | 30 Nm | |||
| 3. Join | 50 Nm | |||
| 4. Angle of rotation | 28° | |||
| 2AZ Camshaft sensor wheel to intake camshaft | B38M0/U0 / B36M0 | M6 | 10 Nm | |