31 12 Wishbone
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Wishbone to swivel bearing | F54 / F55 / F56 / F57 / F60 | M10 | Exclusively use the screw to tighten! Renew screw and nut. |
60 Nm |
| 2AZ Wishbone to front axle support | F54 / F55 / F56 / F57 / F60 | M12 | Tighten in normal position! Renew screw. |
|
| Jointing torque | 100 Nm | |||
| Angle of rotation | 90° | |||
| 3AZ Holder, wishbone rubber mount, to front axle support | F54 / F55 / F56 / F57 / F60 | M12 | Observe installation position of the screws - different lengths! | 100 Nm |
| 4AZ Holder, wishbone rubber mount, to body | F54 / F55 / F56 / F57 / F60 | M10 | Renew screws. | |
| Jointing torque | 56 Nm | |||
| Angle of rotation | 90° |