51 45 Trim, instrument trim panel
WARNING: This page is about a different variant/trim than selected.
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Instrument panel trim to carrier support | F56 / F55 / F54 / F57 / F60 | Ovalhead screw for plastic | 1.8 Nm | |
| Ovalhead self-tapping screw | 2.4 Nm | |||
| 2AZ Support for dashboard on bulkhead (in engine compartment) | F56 / F55 / F54 / F57 / F60 | 21 Nm | ||
| 3AZ Retaining bracket to tunnel/support | F56 / F55 / F54 / F57 / F60 | 21 Nm | ||
| 4AZ Support for dashboard to A-pillar | F56 / F55 / F54 / F57 / F60 | 21 Nm | ||
| 5AZ Support for instrument panel to bulkhead cross member | F56 / F55 / F54 / F57 / F60 | 21 Nm | ||
| 6AZ Heating and air-conditioning unit on support | F56 / F55 / F54 / F57 / F60 | Replace screws | 8 Nm | |
| 7AZ Air duct on support | F60 | 2.4 Nm |