51 11 Front bumper
WARNING: This page is about a different variant/trim than selected.
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Bumper panel to front panel | F54 / F55 / F56 / F57 | M6 | 6 Nm | |
| 2AZ Support, front top, to deformation element, front top | F54 / F55 / F56 / F57 / F60 | M8 | Nut | 28 Nm |
| 3AZ Support, front bottom, to deformation element, front bottom | F54 / F55 / F56 / F57 / F60 | M6x30 | Screw | 8 Nm |
| 4AZ Vertical connection to deformation element | F54 / F55 / F56 / F57 / F60 | M6x20 | 11.8 Nm | |
| 5AZ Deformation element, bottom to adapter, front axle support | F54 / F55 / F56 / F57 / F60 | 11.8 Nm | ||
| 6AZ Deformation element, top, to engine carrier | F54 / F55 / F56 / F57 / F60 | Renew screw Jointing torque Angle of rotation |
100 Nm 180° |
|
| 7AZ Adapter, front axle support to front axle support | F54 / F55 / F56 / F57 / F60 | 100 Nm | ||
| 8AZ V-support to support on cross connection | F54 / F55 / F56 / F57 / F60 | 11.8 Nm | ||
| F60 | 25 Nm | |||
| 9AZ Air duct to deformation element top/bottom | F55 / F56 | 4.6 Nm | ||
| F54 / F57 | 8 Nm | |||
| F60 | 6 Nm | |||
| 10AZ Air duct to cross connection | F60 | 6 Nm |