61 31 052 Removing and installing/replacing center console control panel

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Removal:

Release screw (1).

Unclip center console control panel (2) from center console.

Fig 1: Center Console Control Panel Location

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock and disconnect connector (1) on center console control panel (2).

Fig 2: Locating Center Console Control Panel Connector

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Connect connector (1) to center console control panel (2).

NOTE: Clamps on center console control panel (2) must not be damaged or missing.

Fig 3: Locating Center Console Control Panel Connector

Courtesy of BMW OF NORTH AMERICA, INC.

Clip in center console control panel (2) into center console.

Tighten screw (1).

Tightening torque 61 31 4AZ .

Fig 4: Center Console Control Panel Location

Courtesy of BMW OF NORTH AMERICA, INC.