61 13... Crimping stop parts: Notes

Special tools required: 

• 0 494 159
• 0 496 849
• 0 496 833
• 2 407 379
• 61 4 320
• 61 4 340
• 61 0 210
• 61 0 220
• 61 0 230

Preliminary work needed: 

• Notes for OPENING CONTACTS AND LOCKS OF DIFFERENT CONNECTOR SYSTEMS .
• Notes for CUTTING OFF/STRIPPING INSULATION/CUTTING TO LENGTH 

See also SPECIAL TOOLS FOR WIRING HARNESS REPAIR .

New parts for vehicle electrical system (stops and housing) are available via BMW/MINI parts catalogue.

1. Crimping of NanoMQS stops (only G11; G12) 

   Crimping of NanoMQS contacts (MQS).

   • Special tool handle 0 494 159 or 0 496 849
   • Special tool (die-plate) 0 496 833
   • Stripping tool 2 407 379
2. Crimping of stops up to 2.5 mm 2 

   Crimping MICRO QUADLOCK SYSTEM CONTACTS (MQS) .

   • Special tool 61 4 320

   Crimping MICRO POWER QUADLOCK CONTACTS (MPQ) .

   • Special tool 61 4 320

   Crimping miscellaneous stop parts up to 2.5 mm2

   • Special tool 61 4 340 (replaces 61 4 328 )
3. Crimping of stops above 2.5 mm 2 

   Crimping load current contacts (LSK 8).

   • Special tool 61 0 210

   Crimping SLK 2.8.

   • Special tool 61 0 220
4. Crimping double spring contact (DFK 40) Crimping MAK 8 
   • Special tool 61 0 230