61 33 040 Removing and installing/replacing a fanfare horn

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Removal:

Fanfare on top holder:

Unlock and disconnect the connector (1).

Release nut (2) and feed out fanfare (3).

Fig 1: Feed Out Fanfare Nut And Connector Location

Courtesy of BMW OF NORTH AMERICA, INC.

Fanfare on bottom holder:

Release nut (1) and feed out fanfare (2).

Unlock and disconnect associated connector.

Fig 2: Fanfare And Nut Location

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Fanfare on top holder:

Join fanfare (3) and tighten with nut (2).

Tightening torque: 6 Nm.

Connect the plug (1).

Fig 3: Feed Out Fanfare Nut And Connector Location

Courtesy of BMW OF NORTH AMERICA, INC.

Fanfare on bottom holder:

Connect associated connector.

Join fanfare (2) and tighten with nut (1).

Tightening torque: 6 Nm.

Fig 4: Fanfare And Nut Location

Courtesy of BMW OF NORTH AMERICA, INC.