61 35 975 Removing and installing/replacing bumper aerial for Comfort Access

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Removal:

Disconnect connector (1).

Release latch mechanism.

Pull bumper aerial (2) out of bracket (3).

Fig 1: Pulling Bumper Aerial Out Of Bracket

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Connect the connector (1).

Join bumper aerial (2) in bracket (3).

Installation note:

Ensure bumper aerial (2) engages correctly on bracket (3).

Fig 2: Pulling Bumper Aerial Out Of Bracket

Courtesy of BMW OF NORTH AMERICA, INC.