61 35 954 Removing and installing/replacing interior aerial for Comfort Access (rear seat)

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Removal:

Disconnect connector (1).

Release latch mechanisms on holder.

Remove interior aerial for Comfort Access (2) from holder.

Fig 1: Locating Interior Aerial Connector For Comfort Access

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Join interior aerial for Comfort Access (2) in holder.

Connect the plug (1).

Installation note:

Ensure interior aerial for Comfort

Access (2) engages correctly on holder.

Fig 2: Locating Interior Aerial Connector For Comfort Access

Courtesy of BMW OF NORTH AMERICA, INC.