61 35 953 Removing and installing/replacing interior aerial for Comfort Access (front storage compartment)

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Removal:

Release latch mechanisms on holder.

Remove interior aerial for Comfort Access (1) from holder.

Unlock and disconnect connector (2).

Fig 1: Locating Holder Comfort Access

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Connect connector (2).

Join interior aerial for Comfort Access (1) in holder.

Installation note:

Ensure interior aerial for Comfort

Access (1) engages correctly in holder.

Fig 2: Locating Holder Comfort Access

Courtesy of BMW OF NORTH AMERICA, INC.