51 75 001 Removing and installing/replacing left or right underbody cover

WARNING: This page is about a different variant/trim than selected.

Work shown on F56 MINI COOPER by way of example, deviations in detail are possible in other models.

Removal:

Loosen screws.

Remove cover (1).

Fig 1: Cover Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Remove screws and nuts.

Remove covers (1) and (2).

Fig 2: Cover Screws And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Position cover (1).

Tighten the screws.

Fig 3: Cover Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Position covers (1) and (2).

Tighten bolts and nuts.

Fig 4: Cover Screws And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.