51 45 106 Removing and installing (replacing) function support on instrument panel trim

Necessary preliminary tasks: 

• Remove CENTER CONSOLE .

Removal: 

Release screws (1).

Release function support (2) from clamps (3).

Unlock associated plug connections and disconnect.

Remove function support (2).

Fig 1: Function Support, Clamps And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Release and remount the trim (1, 2) from the clamps (3).

Remount COVER FOR USB AUDIO INTERFACE CONNECTING SOCKET (4)

Fig 2: Trim And Clamps

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Connect associated plug connections.

Engage function support (2) in clamps (3).

Tighten down screws (1).

Fig 3: Function Support, Clamps And Screws

Courtesy of BMW OF NORTH AMERICA, INC.