51 43 075 Removing and installing/replacing side trim panel, footwell, on A-pillar, right

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Removal:

Detach edge protection (1) in area of side trim panel (3).

Pull off the side trim panel (3) inwards from the clips (2).

Feed out side trim panel (3).

Release clips (2) from the body and insert clips into the side trim panel (3).

Fig 1: Edge Protection, Side Trim Panel And Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clips (1) for the side trim panel (2) must not be damaged.

Fig 2: Side Trim Panel And Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Clip in side trim panel (1).

Make sure edge protection (2) is correctly seated.

Fig 3: Side Trim Panel And Edge Protection

Courtesy of BMW OF NORTH AMERICA, INC.