51 36 040 Removing and installing/replacing strip on rear left or right side window

WARNING: This page is about a different variant/trim than selected.

REMOVAL:

Unclip strip (1) from retaining strip (2) beginning at the front.

Retaining strip (2) must not be damaged when doing this.

Fig 1: Removing Strip From Retaining Strip

Courtesy of BMW OF NORTH AMERICA, INC.

INSTALLATION:

Mount strip (1) beginning at the rear.

Make sure strip (1) is correctly seated in area of door and tailgate.

Fig 2: Installing Strip

Courtesy of BMW OF NORTH AMERICA, INC.