41 63 000 Removing and installing flap for fuel filler neck

WARNING: This page is about a different variant/trim than selected.

Removal:

BASE COOPER

Open fuel filler flap.

Use a suitable tool to lift the latch mechanism out toward the front in direction of arrow.

Detach fuel filler flap (1) in direction of arrow.

Fig 1: Detaching Fuel Filler Flap

Courtesy of BMW OF NORTH AMERICA, INC.

COOPER S:

Open flap for fuel filler neck.

Lift out lock (1), turn flap for fuel filler neck (2) in the direction of the arrow and remove.

Fig 2: Turning Flap For Fuel Filler Neck

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

BASE COOPER:

The latch mechanisms (1) must not be damaged.

If the latch mechanism is damaged, the COVER POT must be replaced.

Fig 3: Latch Mechanisms

Courtesy of BMW OF NORTH AMERICA, INC.

Open hinge arm.

Place the fuel filler flap (1) on the hinge arm and push on in the direction of arrow until the locking mechanism engages.

Fig 4: Placing Fuel Filler Flap On Hinge Arm

Courtesy of BMW OF NORTH AMERICA, INC.

COOPER S:

The latch mechanism (1) must not be damaged.

If the latch mechanism is damaged, replace the cover pot.

Fig 5: Latch Mechanism

Courtesy of BMW OF NORTH AMERICA, INC.

Open hinge arm.

Place the fuel filler flap (1) on the hinge arm and turn in the direction of arrow until the locking mechanism engages.

Fig 6: Placing Fuel Filler Flap On Hinge Arm

Courtesy of BMW OF NORTH AMERICA, INC.