51 47 491 Removing refitting/replacing rear engine undercover

WARNING: This page is about a different variant/trim than selected.

NOTE: Picture for example purposes. Some parts may differ in certain details.

Removal:

Release screws (1 and 2).

Remove underbody protection (3).

Fig 1: Underbody Protection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Install underbody protection (3).

Tighten down screws (1 and 2).

Tightening torque 51 71 5AZ

Fig 2: Underbody Protection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.