51 13 124 Remove and fit/replace right cowl panel cover

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Removal:

Release screw plug (1).

Unclip and take out the right cover (2) upwards from the holding rail.

Fig 1: Right Cover And Screw Plug

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Fit and clip in right cover (2) in the holding rail. Lock screw plugs (1).

NOTE: Make sure right cover is correctly fitted on retaining rail.

Fig 2: Right Cover And Screw Plug

Courtesy of BMW OF NORTH AMERICA, INC.