51 12... Removing and installing/replacing insert in bumper cover (JCW)

Preliminary work needed: 

- Remove REAR BUMPER TRIM .

Removal: 

Release insert (1) along the dashed line from the detents and remove.

Fig 1: Locating Inserts

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Swap over ORNAMENTAL GRILLE .

Remount REAR FOG LIGHTS .

Installation: 

Engage insert (1) along the dashed line into the detents.

Fig 2: Locating Inserts

Courtesy of BMW OF NORTH AMERICA, INC.