51 11.. Removing and installing/replacing mounting for fog light on front left or right (Cooper JCW)

WARNING: This page is about a different variant/trim than selected.

Preliminary work needed:

Removal:

Disengage mounting for fog light (1) from detents and remove.

Fig 1: Locating Fog Light Mounting From Detents

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

NOTE: Detents on mounting for fog light (1) must not be damaged or missing.

Position mounting for fog light (1) and engage in the detents.

Fig 2: Locating Fog Light Mounting From Detents

Courtesy of BMW OF NORTH AMERICA, INC.