51 11 761 Remove and install/replace deformation element for front right bumper
WARNING: This page is about a different variant/trim than selected.
Necessary preliminary tasks:
Removal:
Remove screws (1 to 4).
Pull out deformation element (5).
Courtesy of BMW OF NORTH AMERICA, INC.
Installation:
Insert deformation element (5).
Tighten screws (1 to 4).
| Screw |
Tightening torque |
| (1) |
51 11 4AZ |
| (2) |
51 11 6AZ |
| (3) |
51 11 4AZ |
| (4) |
51 11 9AZ |
Courtesy of BMW OF NORTH AMERICA, INC.