| 1AZ Rail pressure sensor |
B36 / B38 / B46 / B48 |
M10 |
|
32.5 ± 2.5 Nm |
| 2AZ Injector to rail |
B36 / B38 / B46 / B48 |
M5 |
1. Replace screws and tighten in screw fastening order. |
|
| |
|
|
2. tightening torque |
5 Nm |
| |
|
|
3. Angle of rotation |
100 ° |
| 3AZ Rail to cylinder head |
B36 / B38 / B46 / B48 |
M6 |
1. Replace screws and tighten in screw fastening order. |
|
| |
|
|
2. tightening torque |
5 Nm |
| |
|
|
3. Angle of rotation |
100 ° |
| 4AZ Feed line to high pressure pump |
B36 / B38 / B46 / B48 |
M14 |
|
30 ±2 Nm |
| 5AZ Feed line to cylinder head cover |
B36 / B38 / B46 / B48 |
|
|
6.5 Nm |
| 6AZ High pressure line to rail and high pressure pump |
B36 / B38 / B46 / B48 |
M14 |
|
33 ±2 Nm |