11 61 Intake plenum
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Intake plenum to cylinder head | B46M0/O0 / B48M0/O0 | M6 | 10 Nm | |
| 2AZ Holder for intake plenum to cylinder head / crankcase | B46M0/O0 / B48M0/O0 | M6 | 10 Nm | |
| 3AZ Rear intake plenum holder | B46M0/O0 / B48M0/O0 | M6 | 10 Nm | |
| 4AZ Intake plenum to rear/front holder | B46M0/O0 / B48M0/O0 | 8 Nm | ||
| 5AZ Holder for wiring harness to intake plenum | B46M0/O0 / B48M0/O0 | 5 Nm | ||
| 6AZ Tank ventilation line to intake plenum | B46M0/O0 / B48M0/O0 | 5 Nm |