Install rear panel

• Connect associated connector.
• Position the bumper cover (1) with the help from another person and clip it into the detents (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Bumper cover to guide
  	2.5Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screw (1) the left and right.
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Bumper cover to guide
  	2.5Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert the expanding rivet (1) on the left and right.

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE LEFT AND RIGHT TAIL LIGHTS .
• Refer to INSTALL THE SERVICE CAP FOR THE TAIL LIGHT ON THE LEFT AND RIGHT .