When replacing the tail light: Remounting the trim on the tail light

Removing the trim on the tail light 

• Unclip the trim (1) with the special tool 0 490 540 (00 9 323)in the marked area (2). 
• Unclip the trim (1) in arrow direction and remove.

  Courtesy of BMW OF NORTH AMERICA, INC.

  Installing the trim on the tail light 

• Check detents for damage.
• Clip in the trim (1) on one side from the inner in area (2).
• Clip in the trim (1) in the direction of the arrow.

Courtesy of BMW OF NORTH AMERICA, INC.