24 21 231 Replacing right radial shaft seal on differential (AISIN F22AW) all-wheel drive vehicle (Countryman base ALL4 AWD, Countryman S ALL4 AWD)

Special tools required  :

• 23 0 490 
• 2 409 025 
• 2 411 739
• 2 408 152
• 2 413 037 
• 2 408 150 

Preliminary work needed  :

• Remove TRANSFER BOX .
• Remove intake silencer housing.

Removal  :

Screw in the special tool 2 409 025 into the outer radial shaft seal.

Turn the screw on the special tool 2 409 025 until the outer radial shaft seal has been pulled out.

Courtesy of BMW OF NORTH AMERICA, INC.

Insert the special tool 2 411 739 into the inner radial shaft seal.

Courtesy of BMW OF NORTH AMERICA, INC.

Screw the special tool 2 411 739 into the inner radial shaft seal.

Turn the screw on the special tool 2 411 739 until the inner radial shaft seal has been pulled out.

Courtesy of BMW OF NORTH AMERICA, INC.

Installation  :

Installation note  :

Coat sealing lips of new inner radial shaft seal with clean transmission oil.

Drive in inner radial shaft seal all the way using special tool 2 408 152 and 2 413 037  .

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note  :

Coat sealing lips of new outer radial shaft seal with clean transmission oil.

Drive in outer radial shaft seal all the way using special tool 2 408 150 and 2 413 037  .

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work  :

• Install TRANSFER BOX .
• Check transmission oil level. Refer to 00 11 500 CHECKING/TOPPING UP OIL LEVEL IN AUTOMATIC TRANSMISSION (AISIN F22AW) (COUNTRYMAN S FWD, COUNTRYMAN BASE ALL4 AWD, COUNTRYMAN S ALL4 AWD, COUNTRYMAN JCW ALL4 AWD) or 00 11 229 OIL CHANGE IN THE MANUAL TRANSMISSION (GS6-60DA, GS6X60DA/BA) (COUNTRYMAN BASE ALL4 AWD, COUNTRYMAN S ALL4 AWD, COUNTRYMAN JCW ALL4 AWD) .
• Install intake silencer housing.